Holiday Robotics logo

View Details

Holiday Robotics

You set the quality standards for the actuators at the core of the robot's drivetrain and for the complete robot, and design and run the tests that verify them.

Apply on Holiday Robotics’ careers page
Holiday Robotics
Seoul, South Korea
18 November 2026

About the role

Quality Engineer: Actuators & Robot Hardware About the Role You set the quality standards for the actuators at the core of the robot's drivetrain and for the complete robot, and design and run the tests that verify them. From test data, you define acceptance criteria and inspection items, so that every unit is judged by the same standard. An actuator is made up of a frameless BLDC motor, a planetary or harmonic reducer, a brake, an encoder, and a motor driver, and is integrated through joints and the arm, waist, and base modules into the complete robot. In an area where no standard yet fits industrial humanoids, you define quality specifications and test methods stage by stage, from parts to the complete robot. You sit in the R&D lab and take part from the early design stage. You tear down and measure failed units to find the root cause and turn it into design, process, part, and firmware improvements, and feed failure data from the factory and customer sites back into test conditions and the next design. You work with design, production, firmware, and software engineers and with suppliers, and judge quality issues and agree on improvements from measurement data and statistical analysis. Key Areas What You'll Do • Define quality specifications and lifetime targets for actuators made up of a motor, reducer, brake, encoder, and motor driver. • Design tests for torque and efficiency, backlash, stiffness, friction, noise, heat, and durability, set up the benches and jigs, and run the tests. • Set pass/fail criteria from the distribution of test data, and define incoming, in-process, and outgoing inspection items. • Find root causes by tearing down and measuring failed units, propose design, process, part, and firmware improvements, and track recurrence. • Review design changes and new revisions to decide the scope of retest, and define the tests that confirm an improvement is complete. • Evaluate supplier quality for key parts such as motors, reducers, and bearings, approve first articles, and drive corrective action on defects. • Design durability, thermal, and safety tests for joints, the arm, waist, and base modules, and the complete robot. • Reflect field failure analysis in test conditions, and define diagnostic data items with the firmware and software teams. Required Qualifications • Degree in mechanical engineering, electrical or electronic engineering, mechatronics, or a related field. • 5+ years of experience in quality, reliability, or testing of drive products such as motors, actuators, reducers, robots, or automotive drivetrains. • Understanding of the structure and main failure modes of motors, reducers, bearings, brakes, and encoders. • Experience designing and running at least two kinds of drivetrain tests among torque, backlash, thermal, and durability. • Experience tearing down and measuring failed units to find the root cause and carrying it through to improvement. • Ability to measure, and judge measurements, with torque sensors, power analyzers, oscilloscopes, and temperature instruments. • Ability to set statistically based acceptance criteria, such as process capability (Cp/Cpk) and distribution analysis, and to analyze test data with tools such as Python. • Ability to set specifications and test plans where no standard exists, and to reach agreement with design, production, and suppliers on the basis of data. Preferred Qualifications • Actuator quality or reliability experience on production products such as collaborative robots, humanoids, or EV drivetrains. • Hands-on reliability engineering experience, such as Weibull analysis or accelerated life models. • Experience running DFMEA and PFMEA, 8D, or FRACAS. • Experience setting up test facilities such as dynamometers, load testers, or environmental chambers. • Experience analyzing backlash, wear, and lubrication in harmonic or planetary reducers, or winding and heat dissipation in BLDC motors. • Supplier quality management experience, such as PPAP, first-article approval, or supplier process audits. • Experience analyzing failures by reading CAN or EtherCAT logs and motor driver current and temperature data. • Experience applying robot safety and motor standards such as ISO 10218, ISO 13849, and IEC 60034 to testing. What We Offer • Competitive compensation based on experience, level, and technical impact. • The test benches, instruments, and facilities needed for testing and failure analysis. • The opportunity to set the quality standard for an industrial humanoid in an area where no standard exists. • Close collaboration with design, production, firmware, and software engineers, and with suppliers.

More open roles at Holiday Robotics

All 27 roles at Holiday Robotics

More robotics jobs in Seoul

All 109 roles in Seoul