
Embedded Firmware Engineer - Humanoid (human)
NEURA Robotics
Zürich, Switzerland · Embedded, Electrical & Electronics
You will own the embedded software on the central ARM controller and the distributed motor controllers, implementing high-rate FOC, safety limits, and communication with the ROS 2 stack.
Apply on NEURA Robotics’ careers page- Company
- NEURA Robotics
- Location
- Zürich, Switzerland
- Specialism
- Embedded, Electrical & Electronics
- Posted
- 17 November 2026
About the role
\n\nYour mission & challengesOur system runs high-density sensing and actuation at 1 kHz. Your firmware will keep the system stable, safe, and responsive. You will own the embedded software on the central ARM controller and the distributed motor controllers, implementing high-rate FOC, safety limits, and communication with the ROS 2 stack. You will work closely with electronics, mechatronics, and controls engineers to turn the architecture into a robust, testable embedded system. • Implement and tune FOC / current, velocity, and position loops on ARM Cortex-M33 class motor controllers at ≥1 kHz. • Develop FreeRTOS-based firmware on a high-performance ARM Cortex-M7 central controller: • Motor network supervision (CAN-FD/SPI/RS485). • Sensor fusion for encoders, force sensing, ToF, IMUs, and tactile arrays. • Safety monitoring, watchdogs, and power-loss handling. • Integrate with micro-ROS / DDS-XRCE to expose the system as a single logical node to the main robot controller. • Implement calibration procedures, configuration management, and firmware update mechanisms. • Design and run unit/integration tests for control and safety logic; support HIL / bench testing. • Work tightly with controls/AI engineers on interfaces, timing budgets, and observability. What we can look forward to • 4+ years in embedded firmware for real-time systems (robotics, motion control, automotive, industrial). • Fluency in C / C++ for microcontrollers and RTOS environments (FreeRTOS or similar). • Practical experience with BLDC motor control, FOC, and real-time control loops. • Experience with one or more of: CAN-FD, SPI, RS485, Ethernet in real-time systems. • Comfortable reading schematics, understanding power and sensing hardware, and debugging at the HW/SW boundary. • Strong focus on safety, reliability, and deterministic behaviour. • Experience with ARM Cortex-M7/M85 platforms and dual-core debugging. micro-ROS / ROS 2 integration experience. • Prior work on servo drives or complex articulated robotic systems. • Familiarity with control theory (impedance control, observers, state estimation).